◆Product Description: All lid materials provided for thermoformed packaging containers are suitable for rigid‑sheet thermoforming. They include both printable composite structures and multi‑layer co‑extruded films. These lids offer excellent sealing when used with thermoformed containers, and, in line with consumer preferences, can also be supplied as easy‑peel lids. ◆Safety: The packaging materials we produce comply with national standards as well as relevant standards, directives, and regulations in the United States, Europe, Australia, and other regions. No additives that could compromise food safety are used during processing, ensuring full compliance with food‑safety requirements. ◆Storage Conditions: Highly flammable; store at 5–35°C in a dry, well‑ventilated environment, keeping at least 1 meter away from heat sources. ◆Key Advantages: 1. Directly produced via multi‑layer co‑extrusion blow‑molding, these lid films are soft, exhibit excellent conformability, and boast high transparency, whiteness, and gloss. 2. They provide outstanding oxygen barrier properties, helping to preserve product quality over extended periods, while also offering superior abrasion resistance and strong sealing performance. Additionally, they block light and effectively prevent moisture and oxygen ingress, thereby extending shelf life. 3. They demonstrate robust resistance to both low and high temperatures, exhibit excellent processability, deliver superb printability, and can be customized to meet specific customer needs, with various material compositions and structural designs available.

◆Product Description: All lid materials supplied for thermoformed packaging containers are suitable for rigid‑sheet thermoforming. They include printable composite structures as well as multilayer co‑extruded films. These lids provide excellent seals with thermoformed containers and, in line with consumer preferences, can also be offered as easy‑peel lids. ◆Safety: The packaging materials produced comply with national standards and with relevant standards, directives, and regulations of the United States, Europe, Australia, and other regions. No additives that could compromise food safety are used during processing, ensuring full compliance with food‑safety requirements. ◆Storage Conditions: Flammable; store at 5–35°C in a dry, well‑ventilated environment, keeping at least 1 meter away from heat sources. ◆Key Advantages: 1. Directly manufactured via multilayer co‑extrusion blow‑molding, resulting in soft, highly conformable lids with high transparency, whiteness, and gloss. 2. Excellent oxygen barrier properties, ensuring long‑term preservation of product quality; superior mechanical performance including abrasion resistance and strong sealing; light‑proofing and effective barriers against moisture and oxygen, thereby extending shelf life. 3. Strong resistance to both low and high temperatures; highly adaptable to processing conditions, delivering outstanding printability; custom designs available to meet specific customer needs, with a variety of material compositions and structural configurations. Product Specifications: Thickness, Width (fold diameter), Roll Diameter, Core Inner Diameter — 30–250 μm, 1300 mm, 300–1000 mm, 3 inches. Typical Structure: PA/adhesive/PE/adhesive/EVOH/adhesive/PA/adhesive/PE. Note: Other specifications can be produced upon customer request. Product Performance Test Results: | Test Item | Unit | Typical Value | |-------------------------------|--------------|---------------| | Tensile Strength | MPa | 35 | | Elongation at Break | % | 430 | | Heat Seal Strength | N/15 mm | 20 | | Light Transmittance | % | 93 | | Haze | % | 11 | | Gloss | — | 80 | | Coefficient of Friction (C.O.F) | — | 0.18 | | Water Vapor Transmission Rate | g/mm²·h·atm | 5.6 | | Oxygen Transmission Rate | ml/mm²·h·atm | 2.5 |

◆Product Description: All lid materials supplied for thermoformed packaging containers are suitable for rigid‑sheet thermoforming. They include printable composite structures as well as multilayer co‑extruded films. These lids provide excellent seals with thermoformed containers and, in line with consumer preferences, can also be offered as easy‑peel lids. ◆Safety: The packaging materials produced comply with national standards and with relevant standards, directives, and regulations of the United States, Europe, Australia, and other regions. No additives that could compromise food safety are used during processing, ensuring full compliance with food‑safety requirements. ◆Storage Conditions: Flammable; store at 5–35°C in a dry, well‑ventilated environment, keeping at least 1 meter away from heat sources. ◆Key Advantages: 1. Directly manufactured via multilayer co‑extrusion blow‑molding, resulting in soft, highly conformable lids with high transparency, whiteness, and gloss. 2. Excellent oxygen barrier properties, ensuring long‑term preservation of product quality; superior mechanical performance including abrasion resistance and strong sealing; light‑proofing and effective barriers against moisture and oxygen, thereby extending shelf life. 3. Strong resistance to both low and high temperatures; highly adaptable to processing conditions, delivering outstanding printability; custom designs available to meet specific customer needs, with a variety of material compositions and structural configurations. Product Specifications: Thickness, Width (fold diameter), Roll Diameter, Core Inner Diameter — 30–250 μm, 1300 mm, 300–1000 mm, 3 inches. Typical Structure: PA/adhesive/PE/adhesive/EVOH/adhesive/PA/adhesive/PE. Note: Other specifications can be produced upon customer request. Product Performance Test Results: | Test Item | Unit | Typical Value | |-------------------------------|--------------|---------------| | Tensile Strength | MPa | 35 | | Elongation at Break | % | 430 | | Heat Seal Strength | N/15 mm | 20 | | Light Transmittance | % | 93 | | Haze | % | 11 | | Gloss | — | 80 | | Coefficient of Friction (C.O.F) | — | 0.18 | | Water Vapor Transmission Rate | g/mm²·h·atm | 5.6 | | Oxygen Transmission Rate | ml/mm²·h·atm | 2.5 |