logo

Product Center
Product Center
Number of views:
1000

Stretch Forming Film

All cover materials provided for thermoformed packaging containers are suitable for rigid sheet forming packaging. There are both printable composite structures and multilayer co-extruded films. It can be well sealed with thermoformed containers, and can also provide easy-to-peel lid films according to consumer habits.
Product serial number
Product description
Parameters

◆Product Description:

All cover materials provided for thermoformed packaging containers are suitable for rigid sheet forming packaging. There are both printable composite structures and multilayer co-extruded films. It can be well sealed with thermoformed containers, and can also provide easy-to-peel lid films according to consumer habits.

◆Safety:

The packaging materials produced comply with national standards and relevant standards, directives and regulations of the United States, Europe, Australia and other countries and regions. No additives that affect food safety are added during processing. Fully comply with food safety regulations.

◆Storage Conditions:

It is easy to burn, please store at 5~35℃, keep the storage environment dry and ventilated, and keep at least 1 meter away from the heat source.

◆Advantages:

1. Directly produced by multi-layer co-extrusion blown film, the cover film is soft, good fit, high transparency, whiteness and gloss;

2. It has excellent oxygen barrier properties, which can keep the contents from deteriorating for a long time; it has mechanical properties such as wear resistance and strong sealing; it can protect from light, block moisture and oxygen, and extend the shelf life;

3. Strong resistance to low temperature and high temperature; strong processing adaptability, very good printing effect, cover film of different materials and different structures can be designed according to customer needs;

 

Product Specification

Thickness

Width (folding diameter)

Roll Diameter

Core Inner Diameter

30-250μm

1300mm

300-1000mm

3"6"

Typical structure: PA/adhesive/PE/adhesive/EVOH/adhesive/PA/adhesive/PE

Note: Other specifications can be produced according to customer requirements.

 

Product Performance

Test Items

Unit

Typical value

Tensile Strength

MPa

35

Elongation at break

%

430

Heat sealing strength

N/15mm

20

Transmittance

%

93

Haze

%

11

Gloss

 

80

Friction Coefficient C.o.f

 

0.18

Water Vapor Transmission Rate Wtr

g/mm 24h.atm

5.6

Oxygen Transmission Otr

ml/mm 24h.atm

2.5

 

We could not find any corresponding parameters, please add them to the properties table
Next

SHANGHAI TANGKE NEW MATERIAL TECHNOLOGY CO., LTD.

 

Add: No. 611, Shantong Road, Jinshan District, Shanghai (Yangle Road Crossing)

Tel:021-67296682  
Phone:021-67296698  
Email:[email protected]ke.com  
Fax:021-67296680

 

Copyright © 2021 Shanghai Tangke New Material Technology Co., Ltd.  All Rights Reserved    沪ICP备16047203号   300.cn   shanghai