+
  • 1.jpg
  • 微信图片_20231227103939.jpg

Vacuum packaging film

Category:


All lid materials supplied for thermoformed packaging containers are suitable for rigid‑sheet thermoforming. They include both printable composite structures and multilayer co‑extruded films.

021-67296682

tangke@shtangke.com

Product Introduction


◆Product Description:

All lid materials offered for thermoformed packaging containers are suitable for rigid‑sheet thermoforming. They include both printable composite structures and multi‑layer co‑extruded films. These lids provide excellent seals with thermoformed containers, and, in line with consumer preferences, can also be supplied as easy‑peel lids.

◆Safety:

The packaging materials produced comply with national standards as well as the relevant standards, directives, and regulations of countries and regions including the United States, Europe, and Australia. No additives that could compromise food safety are used during the manufacturing process, ensuring full compliance with food safety requirements.

◆ Storage conditions:

Highly flammable; store at 5–35°C, ensuring the storage area is dry and well-ventilated, and keep at least 1 meter away from heat sources.

◆Key Advantages:

1. Directly produced via multi-layer co-extrusion blow molding, the cover film is soft, exhibits excellent conformability, and boasts high transparency, whiteness, and gloss.

2. It boasts excellent oxygen barrier properties, ensuring that the contents remain unspoiled for an extended period; it also exhibits robust mechanical characteristics such as wear resistance and superior sealing; furthermore, it provides light protection and effectively blocks moisture and oxygen, thereby extending shelf life.

3. Excellent resistance to both low and high temperatures; highly versatile in processing, delivering outstanding print quality; capable of designing cover films with various materials and structures tailored to customer requirements.

 

Product Specifications

Thickness Width (fold diameter) Roll diameter Core inner diameter
30–250 μm 1300mm 300-1000mm 3"6"
Typical structure: PA/adhesive/PE/adhesive/EVOH/adhesive/PA/adhesive/PE
Note: Other specifications can be manufactured according to customer requirements.

 

Product Performance

Test Item Unit Typical value
Tensile strength MPa 35
Elongation at break % 430
Heat-seal strength N/15mm 20
Transmittance % 93
Haze degree % 11
Glossiness   80
Coefficient of Friction C.O.F   0.18
Water Vapor Transmission Rate (WTR) g/mm 24h.atm 5.6
Oxygen Transmission Rate (OTR) ml/mm 24h.atm 2.5

 

Product Inquiry


Product Name:

Submit

Keywords: